One of the things you should do to maintain your pool would be to balance the waters’ pH acid to assure comfort and safety while having fun with your loved ones. Using Borax in pool is actually a great method on how you can do that!
But how exactly does Borax in pool help with your pool’s pH balance, and how should you do it? Read on as we show you everything you need to know about adding Borax in pool.
Table of Contents
What Does Borax Do For a Pool?
Borax is a type of salt or chemical derived from boric acid, used in many cleaning recipes. It’s also used in small-scale gold minion operations and now known to help clean and maintain your pool’s pH balance.
It’s a safer alternative as compared to using soda ash, and it can easily be found in your local grocery store at an affordable price. An added benefit to using Borax in pool would be that it prevents algae growth and makes your water sparkling and soft.
How to Use Borax in Pool
When attempting to raise your pool’s pH levels through adding Borax in pool, here are the things you’ll need:
- pH testing kit
- Borax
- Safety gloves
It’s very easy using in Borax in pool, just follow these steps:
-
pH Test
Test your pool water for its acidity level. The ideal range would be between 7.4 to 7.6. If lower, then you will need to raise the pH level with Borax.
-
Measure Borax
Measure about 20 ounces of Borax for every 5,000 gallons of water in your pool. This helps raise the pH level by up to 0.5.
This will all depend on the chemical content of your water, so make sure to underestimate, as it’s better to have lower pH levels to easily adjust.
-
Add Borax
Switch on your pool’s water pump to let the Borax circulate. Then, add in Borax to the deepest part of the pool, letting the pump run for three days.
-
Check pH Levels
After three days, check the pH levels to see if it is within the ideal range. If still too low, then add in more Borax, using the same measurements as last time (or less, depending on the pH level).
Take note that if the pH level is higher than the ideal range by about 0.2 or less, then there’s no need to worry. It will naturally decrease after a few weeks.
In Conclusion
If you want a quick and easy way to balance the pH acid, then you can do so by using Borax in pool! This convenient product can help maintain the cleanliness of your pool, having you and your loved ones enjoy.
Hopefully, this article on how to add Borax in pool will help you become more knowledgeable with caring and maintaining your pool. Don’t wait any longer and use Borax in pool for balanced pH levels today!
If you have any other questions or tips when using Borax in pool, then do comment down below. We’d love to hear what you have to think.
do I backflush as usual?
My pool keeps turning greenish and all the regular chemical for pools are not doing it so I’m going to try this borax hope it works
sugest you try a coper algaecide. worked for me after bosoda and shock failed.
xax baking
My pool has a spot that keeps turning greenish it is on the north side of the pool will Borax help this.
Does Borax make a tablet that can be slowly dispensed into a well to raise the pH of well water?
In Arizona, the makeup water often has total alkailinity of 250 ppm, or more. I was having problems with the pool; it had TA over 200 and PH less than 7.
I started cycling the pH down with acid to 6.5, then raising the pH with borax. It takes about twice as much borak (by volume) as dry soda ash (pH up) as the ph tables suggest. Raising the pH with borax doesn’t raise the total alkainity. It may take several bumps down and up to get the pool back into its sweet spot, but once it gets there, it’s very stable.