High pH levels in the pools are considered to be a state when your swimming pools have water with a pH range above 7.6. Can you swim in a pool with high alkalinity? This is a question that hits the head of swimmers who simply love diving down the pools to chill on a hot summer day? 

For this, the answer is a simple ‘no’. After thorough research and observations, here is a quick guide where you will get to know the reasons to lower down the pH and ways to implement them for a happy looking pool.

Reasons to Lower Down the Ph of Your Pools

If you tend to swim in pools that have high pH content, then you are prone to dangers that come associated with the high pH content value. These problems may not be significant at first, but they have all the might to gradually increase and show up posing serious health issues. 

Below listed are a few symptoms that may signal you that the pH level in your pool is not adequate:

• Irritation in skin and eyes
• Scaling in pipes
• Demand for higher chlorine content
• Clogging of pipes and filters

Quick and Easy Tips for Maintaining the Ph of Your Pools

A pool with high pH means that it consists of soft water which may sound pleasing but actually is the other way round. It is not deemed to be suitable for the swimmers and decreases the effectiveness of the chlorine that you add to the pools for disinfection purposes. 

Is it safe to swim in a pool with low alkalinity is haunting your minds, then here are a few ways to gain control over the pH levels:

Pool Chemistry test

As it is said that prevention is better than cure, make it a habit to test the pools at least twice a week to be well informed about the pH levels. Yes, of course, it may consume a little bit of your precious time, but this is advised so that you can keep an eye on the increasing pH level of the pool.

Cleaning it regularly

Cleanliness is next to godliness, we have heard this saying since childhood. This does not only apply to your surroundings and home but for your pool as well. The dirt and unwanted things such as leaves that get collected inside the pools may hamper the pH of the water and give it a hike. 

Thus you must ensure that your pools are free from dirt and debris to ensure balanced pH.

Pool Shocking on a regular basis

Usually shocking your pool once a month is quite feasible. But if you want to keep a check on the increasing pH count, you should practice it more often. Especially when you get to see climatic variations, pool shocking can help in restoring the pH levels.

Maintaining proper filtration

Keep a check on the pool filters. Ensure that the filtration system is performing well so that the pH of the water stays balanced and clean.

How to Lower Down the Ph Levels in the Pool?

It is essential to keep the pool water properly balanced, lack of ability to do the same can make you uncomfortable in swimming and may also cause health concerns. Also, it causes damage to the equipment of the pools and incurs a money drain to get things in the right shape.

Pool water that has a high quantity of pH can lower the effectiveness of chlorine. This will further give birth to algae build-up and hazy water. Treating pools with various chemicals also stands as a reason for the increase in pH levels. 

High pH level pool water is not recommended and does not stand safe for swimming. Thus arises the need for treating the pool water to lower the pH value. 

Read further to get some quick assistance for treating high pH value pool water:

Testing the pH level

For effective treatment of pool water, the primary concern is to examine the pH level of pool water, which lets you know the actual condition of the water. If the pH level lies between 7.2 and 7.6, then it is good enough for you to take a deep dive into your pool. 

But if the story is another way round, then you need to take care of the pH content and lower it down to prevent yourself and everyone getting down the pool from the adverse effects that it may bestow. 

Treatment of water

Once you get to know that the pH level of the pool water is not adequate, the next thing that comes in line is water treatment. For this, you are required to buy products that can decrease the pH level. 

Also, make sure that you wear proper clothing while performing the water treatment task so that the chemicals do not spill on you as it can cause skin irritation. 

Wear proper safety gear such as goggles, gloves, safety glasses, etc. to stay at bay from letting the chemical come into contact with your body. Use pool brushes to disperse the chemicals evenly so that the water receives adequate pH treatment.

Retest

Once you are done with the water treatment, you need to take a break and leave it for some time to settle down. Retest the pH level of the water, and if you find it good to go with, you may resume using the pool. 

And, if you still find that the pH level is not balanced, you can proceed further to add more products to reduce the pH of pool water.

Role of pH Reducers

There are various products available that can help in reducing the pH levels, but out of them, muriatic acid and sodium bisulfate stand as the most effective ones. These are known as pH reducers but needs to be used with proper care and caution.

Sodium Bisulfate

It is also known as dry acid and comes in a powdered format. It is mild and is safe to use for reducing the pH level in the pools.

Muriatic acid

Muriatic acid is another pH reducer and is commonly known as hydrochloric acid. It is used for reducing the pH levels and also finds major usage in other cleaning activities. It is comparatively stronger than sodium bisulfate. 

It is liquid and thus should be used with utmost care and caution so that it doesn’t prove to be harmful to the person using it for the good of swimming pools.

Conclusion

Owning a pool is not enough; taking care of the pool health and monitoring it continuously is also required to make it safe for swimming. The ill-effects of high pH content in the pool cannot be underestimated. So if the pH levels are not ideal, make sure that you find ways to deal with it to ensure safety while swimming.

After spending about 10 hours researching the top steps for the above ground pool, we have realized that making your own DIY walk-in steps can be a great, economical option if you’ve the basic tools needed and like doing some handy work.

When you buy an above ground pool, it feels like you have bought a bare-bones pool kit. You are also responsible for buying a pool pump and filters separately and then comes the trouble of installation. After you have the pool ready, you will need steps to reach it and take a dip.

If you’ve read this far, you have already made up your mind to build your own walk-in steps. It’s a great idea. The best part is the process is pretty straightforward. 

How To Build DIY Walk In Steps For Above Ground Pool

If you are choosing a material such as PVC, it will be easier to create a ladder at home. Before you do anything, you must measure the height of your pool. When it comes to depth, on average, most above ground pools are 48 to 52 inches deep.

Materials Needed

These are the materials you will need to start this project:

• 2 inches PVC pipe (ideally the pipe must be twice the height of your pool)
• 6×2 inches 90-degree PVC elbows 
• 2×2 inches tee
• 4×2 inches 45-degree elbows 
• Spray foam insulation 
• Screws
• PVC primer
• Skateboard tape 
• PVC glue

Steps For Building The Stairs 

Step 1: Cut the PVC pipes into 18 inches for creating steps 

Step 2: Spray some foam insulation into each one for improved stability. Leave the pipes for drying.

Step 3: Take the 90-degree elbow and connect 2 elbows with one 18 inches piece of PVC for creating the bottom rung.

Step 4: Next, insert 2 pieces of 12 inches PVC for creating the height of the ladder. Top each section with a tee joint and glue them into place at the same time.

Step 5: Keep on repeating until you reach the desired height.

Step 6: Once you are done, add 2 90-degree joints at the top and set the ladder aside. 

Step 7: Follow the same steps to build the other ladder. However, when you reach the top, this time, you need to add a 45-degree joint at the top for creating a slope.

Step 8: Use the glue to attach the ladder with your above ground pool. After this, use a waterproof skateboard tape on each rung to prevent slipping.

There you go, you are done building your DIY steps. This is wonderful for small kids. If adults are to use the above ground pool, it’s recommended to choose another material for building sturdy steps. 

Factors To Consider Before Building Walk-In Steps 

Here are some important factors to consider before building the steps:

• Material 

You can design your above ground pool steps with any material – wood, plastic or metal. Wood is a great option because it is weatherproof. Metal, on the other hand, can get rusty so it’s best to avoid. Plastic is an ideal option because it’s durable and it is a safe material. 

• Number of Steps

The next thing you need to know is how many steps you want. You can design steps that exist inside the pool leading to a deck or another set of stairs. It’s totally your call.

One-step design is ideal if you want it to exist inside the pool or outside it as one piece.

Two-step design sandwiches the wall of the pool with the base of the steps. It must rest on the ground and the floor of the pool.

• Orientation 

It is very important to consider the orientation of the steps when you are designing DIY walk-in steps for an above ground pool. This has a lot to do with the comfort. 

You can either construct them like a ladder or normal stairs. It depends on the kind of comfort you are looking for.

Final Words 

Make sure you take accurate measurements of the height of the pool before starting your DIY project. You will only be able to use the stairs if the height of the ladder is compatible with that of your pool.

Take all necessary precautions when building the steps. Keep children away from the premises. Double-check the connection just to be sure the joints of the pipes are secure in position before using the steps. 

UPDATED: Nov 01, 2019.

We all love summer and the joy it brings – of course, swimming. In this article, I will look at everything you need to know about the radiant pool.

So, if you have been searching for radiant pool reviews and seems not to find what you want. Here I got you covered.

What benefits do radiant pools offer?

They have a lot of benefits including:

1. Built to last – They use the same tech that is used to construct airplanes. Thus, their walls are stronger that concrete, polymer, and steel.
2. Customizable – You can easily choose from different sizes and shapes. Hence, it is easy to get a pool that will fit your need and backyard.
3. Prolongs your swimming season – They come with insulated wall panels than heat your water.
4. Environmentally friendly – These pools are friendly to the environment since they are made of ozone-friendly elements (100% recyclable).
5. Made in USA – They are made in USA and come with a lifetime warranty.

What size pool is often purchased?

The most bought sizes of radiant pools are 24 inches and 27 inches round pools. If you have a limited size, you can get a size 16 inches pool.

If possible, take a tape measure and determine the size of your backyard before you start looking for a radiant pool.

Round or oval! Which one is better?

Round radiant pools are easier to install and simple. Oval models provide sizes that give you more length when swimming, although they require cement footers.

Hence, a cement track needs to be onsite when you are installing an oval radiant pool which will cost you more.

What factors should you consider when choosing a location?

They include:

1. A place with effective drainage.
2. Place where a dump truck, excavator, and cement truck can access with ease.
3. A place where you can fence or that has a fence.

What are vermiculite bases?

A good number of swimming pool firms install their products with a sand base under a vinyl liner. They usually use sand because it’s more affordable.

However, a sand base will move and form an uneven ground over time. An uneven ground makes it hard to vacuum your pool and allows rocks to come up.

Radiant pools are installed with a strong vermiculite base. It is a natural insulator, meaning that you enjoy insulations on both the floors and walls of your pool. This base mix with cement to provide a smooth and strong bottom that remains flat forever and prolongs your liner’s life since there are no rocks popping up.

What other options are there?

Other things that you should consider for your radiant pool include:

1. Stairs – They will make your getting in and out of your pool easy.
2. Solar blanket – Use it at night to increase the temperature of your pool by 10 degrees.
3. LED Lighting – Choose colored or white LED’s to form a stunning pool side during the night.
4. Chlorinator – It makes it simpler to maintain the ideal chlorine level in your radiant pool.

Conclusion

Radiant pools come with a lifetime warranty that covers winter damage. That’s how good these pools are.

UPDATED: Nov 01, 2019.

Pool brushing is a critical part of keeping your swimming pool clean. After sometimes, particles and other materials enter your pool and can even breed. To prevent this from occurring, you need to give your facility a thorough brushing using the best pool brush.

There are lots of brands and models which you can choose from. That is why we have made things easier by providing you with a list of the best models to purchase. By following this article, you will have an easier time getting a product that will suit your needs.

At a Glance: The 10 Best Pool Brush Discussed in Our Roundup:

• Milliard Nylon Hybrid Swimming Pool Algae Brush (Top Pick)
• S. Pool Supply Aluminum Wall, Floor Pool Brush (Top Rated)
• Milliard Heavy Duty Wire Pool Algae Brush (Editor Choice)
• Poolmaster Vinyl Liner Swimming Pool Brush
• The Wall Whale Classic Swimming Pool Brush
• Aquatix Pro Heavy Duty Pool Brush
• Poolmaster Aluminum-Back Algae Brush
• Blue Torrent Brush Around for Swimming Pools
• CJ Lifestyle Crystal Pool Brush
• Oreq 22 Inches Pro Animal Pebble Brush

Top 10 Pool Brushes Reviews 2019

Here are the top 10 pool brushes on the market today.

1. Milliard 18 Inches Heavy Duty Nylon Wire Hybrid Swimming Pool Algae Brush

Pools provide a lot of fun during the hot months, but they require to be maintained and cleaned properly to keep them sanitary and clean all season. No one does it better than the Millard 18 Inches Pool Brush that gets your pool back to its best condition sooner.

Since paint isn’t tough and concrete is, the manufacturer used wire bristles and nylon, so the brush can provide a prickly scrub to stubborn stain on the concrete surface without damaging the painted walls or floors. In short, the nylon bristles scrub off growths and stains and the wire bristles provide them with additional help without being abrasive.

In-ground swimming pools are often quite big, so this brush for algae is extra-wide to clean large surfaces. Actually, it cleans 18 inches and is reinforced by an aluminum cover that enables you to clean dirt along crevices and walls.

2. S. Pool Supply Professional 18 Inches Aluminum Wall and Floor Pool Brush

There are hundreds of aluminum pool brushes out there but most of them won’t even last seven days. If you need something that is durable and sturdy, then the U.S. Pool Supply might be what you need.

The different between this brush and other aluminum models is that this brush is made of genuine aluminum. That means the pole of your brush won’t rust even when you use harsh chemicals to clean your facility.

And the best part of the brush is the back – provides you with sufficient support even when operating under high-pressure water. It comes with five rows of durable but soft nylon bristles that make it perfect for vinyl liner floors.

The brush is quite effective at sweeping debris from the walls and floors of your swimming pool and weighs only 12 ounces.

3. Milliard 5 Inches Heavy Duty Wire Pool Algae Brush

Its name suggests it all! You will not need any other brush to clean your swimming pool when you get the 5 inches heavy duty wire brush. It is an ideal all round brush that will sweep and clean out any debris and dirt from your pool floor and walls.

One great feature of this item is the heavy duty grime fighter that keeps algae away from your pool.  And it measures 9.8 x 7.6 x 1.8 inches making it ideal for cleaning a large surface. What’s more, it is a lightweight unit that weighs 8.5 ounces only.

The brush is a bit smaller, but this only makes it easier to twist and turn to hit those pesky corners where dirt might be hiding. Its bristles are reinforced with long-lasting aluminum so you can exert sufficient pressure to clean stubborn stains and remove algae.

4. Poolmaster Deluxe Heavy Duty Vinyl Liner Swimming Pool Brush

All pool owners need to have this light and friendly brush in their pool brush collection! It is a lightweight product, making it effortless to operate when cleaning your pool and comes with a polypropylene curve-design body.

Hence, you can easily do a light cleaning after conducting a dense wash so that the floors, sides, and walls of your facility can remain clean for longer. Despite its lightweight nature, you will be surprised at how effective it’s at cleaning algae.

Actually, it is very easy to turn and toss the pole, without any issue, to eliminate any dirt from all the corners and weird places. Another feature of this item is 5 rows of bristles which are constructed to sustain and endure through harsh conditions.

All in all, it’s a great pool brush that is very affordable. Also, you can wash your spa using this brush.

5. The Wall Whale Classic Swimming Pool Brush

The Wall Whale Classic Pool Brush is a versatile, fast, powerful, simple, and thorough pool brush. This makes it possible to be used when you are standing to avoid those backbone pains while providing a sparkly clean facility every day.

It is a stainless steel item that you can use for months and function just fine for all that time. The item weighs around 1 pound and measures 18 x 2 x 12 inches, proving the ideal size of residential pool cleaning.

In fact, the dimensions of this product are perfect for cleaning waterline, steps, and floors. It is one of the easiest to use brushes out there. You only need to attach it to a pole and then push it into place using your hands.

The brush is perfect for plaster and will last long even when operating in water with high pressure.

6. Aquatix Pro Heavy Duty Pool Brush

With Aquatix Pro, pool cleaning becomes an easy chore that you will enjoy. The item cleans floors, steps, tiles, and walls effortlessly, making them clean within seconds. Actually, you get the perfect pool which is ready for use within minutes.

The bush cleans and glides even hard to clean places due to its ability to reach all surface. So, you can use it to clean corners and under the stair to leave your pool free of algae. Furthermore, the brush was designed to last – simply buy one and you will never go to the market again.

Its durability is provided by the aluminum top and the mega strong bristles that don’t break and won’t damage your swimming pool lining or handed plastic frame. You will be excited to learn that the product is compatible with most pool and comes with a 100% satisfaction guaranteed.

7. Poolmaster Aluminum-Back Algae Brush

Poolmaster Aluminum-Back Algae Brush provides an impeccable performance and is built to last for years. The unit is made of resilient elements that provide a sparkling swimming pool any time you want.

With this item, you can easily keep algae away from your swimming pool and is ideal for use on gunite swimming pools with tough surfaces. Furthermore, the product is made of die-cast aluminum on its back and the handle to offer extra-strength.

Its five rows of durable stainless steel bristles make it ideal for cleaning large facilities and do not use this brush for fiberglass or vinyl liners surfaces. As well, it comes in a compact size that makes it easy to clean hard to hit spots.

8. Blue Torrent AC 88072 Brush Around 360 Degrees for Swimming Pools

The Blue Torrent AC cleans your swimming pool corners effortlessly due to its 360-degree cleaning ability. This ability was specially made to clean the floor, walls, and other hard to reach the surface to ensure that your pool remains 100% clean.

With this brush, no dirt or algae will be out of your reach. Every corner of your pool will provide the much-needed boost to make it fresh and ready for your use. And that is made possible by the built-in corner brushes that help to clean even the tightest of corners of steps and walls.

It is very easy to install this item to a pole. You only need to attach it to a telescopic pole and you will be ready to go. The 12 inches power bristle brush cleans a wide surface, reducing the time you need to clean your pool.

9. CJ Lifestyle Crystal Pool Brush

CJ Lifestyle Crystal Pool Brush features a lightweight and super firm heat treated alloy handle that offers maximum durability. The product also features an easy push slimline frame that minimizes resistance in the water.

Another feature of this item is the hardened plastic frame that is glued and screwed to the metal handle. This ensures that your brush won’t break or bend when cleaning your swimming pool. Actually, this is a strong and hard wearing rake that will last for long.

The brush comes with bristles molded into plastic that prevent them from falling out over time. Furthermore, the bristles are made with the ideal amount of power to maintain a hard stroke while preventing damage to your lining. What’s more, you get a 100% lifetime replacement guarantee in case the item gets damaged.

10. Oreq 22 Inches Pro Animal Pebble Brush

The Oreq 22 Inches Pro Animal Pebble Brush with gravel bristle takes cleaning your swimming pool to another level. The bristles are the ideal match for pebble tec and other aggregate floors and surfaces.

It comes with a straight body design that ensures the bristles contact the whole surface for maximum clean while its ends enable easier access to the corners and crevices of your pool. It also comes with 2 built-in magnets that come in handy when retrieving stains that cause metal objects to the floor.

The item was designed with the expert in mind and will last for years. It is a product that will ensure you get a clean pool any time you want.

Choosing Brush for Your Pool

Now that we have reviewed some of the best pool brushes on the market today, let’s look at how you can choose the best model for your swimming pool.

Consider the Size – The first thing you should consider is the size of your swimming pool and the size of the brush. If your pool is large, getting a small sized brush will only mean that you will take a lot of time before you clean it. An 18 inches brush might be sufficient for a large swimming pool.

Consider the Bristles – Another thing that you should consider is the material used to make the bristles of the brush. A stainless-steel model is ideal for removing stains from gunite and concrete but will destroy fiberglass and vinyl pools. Choose a nylon brush for these kinds of pools.

Consider Pool Shape – The shape of your swimming pool is yet another critical factor that you should consider when buying your pool brush. Some brushes are ideal for some pool shapes. For instance, rectangular brushes are perfect for square pools while round pools require rounded brushes.

Pool Cleaning Tips

It won’t matter they kind of brush you use, if you follow these few tips you will get the best out of your swimming pool.

• Brush your swimming pool regularly – Brush the floor and sides of your facility at least twice per week. This will prevent the development of algae and scrub off dirt before it sticks to the surface.
• Use the right cleaners – Ensure that your facility has the recommended amount of chemicals. This is to ensure that you don’t destroy your pool with unsuitable chemicals.

FAQs About Best Pool Brush

Q: Do pool brushes come with Poles?

A: Not really. You might need to purchase a separate pole for attaching to your swimming pool brush. The best thing, these brushes attach to most standard poles. And there are poles that are meant to be attached to specific brushes.

Q: Which brand provides the best pool brushes?
A: There is no specific brand that we can say is better than the others. However, different brands have their unique features that make them unique. Of important, get a brush that is within your budget and the one that suits your swimming pool.

Q: Should I buy any pool brush to clean my pool?
A: No. There are brushes for different types of swimming pool, depending on the liner. Some come with soft bristles that will clean soft liners while others come with hard bristles for scrubbing hard surfaces.

Q: When should I replace my pool brush?
A: You should replace your pool brush when you notice that the current one has been worn out. When its bristles cannot clean your pool effectively.

Q: Are pool brushes expensive?
A: Not really. They are one of the most affordable products for cleaning your swimming pool. However, it will depend on the model you buy and where you buy your pool brush.

Q: Who should use a pool brush?
A: A pool brush can be used by anyone thanks to the ability to add a pole. So, short and tall people can clean the pool while standing at a safe distance.

Final Thoughts

Now that we have reviewed the best brushes on the market today and given you a buying guide for the best pool brush, it is time for you to hit the market and get your preferred model. Follow this guide and you will get a brush that will work effectively for your swimming pool.

UPDATED: Nov 01, 2019.

A fresh coat of paint can easily change the feel and look of your pool within minutes. Choosing the perfect paint for your pool deck will help to ensure that the job gets done and the right way.

Therefore, whether you are looking for the best pool deck paint for your brand new swimming pool or because yours is fading, blistering, chalking, or bubbling, this post got your back.

In this pool deck paint reviews and guide, you will get six of the best paints on the shelves today and a guide to follow when buying your paint.

At a Glance: Our 6 Choices for Best Pool Deck Paint to Feature in This Article:

• Deck-O-Seal Deck O Seal Gray 4701032 (Top Pick)
• Dyco Pool Deck Waterborne Acrylic Stain (Top Rated)
• Kelly Technical Olympic Patio Tones (Editor Choice)
• DECK-O-SEAL Deck O Seal Tan 4701033
• In The Swim Patio And Deck Paint White
• DeckWise Ipe Seal Hardwood Endgrain Sealant

Here Are The Best-Selling Pool Deck Paint in 2019

Below is a review of the top 6 pool deck paints on the market today.

1. Deck-O-Seal Deck O Seal Gray 4701032

Deck-O-Seal is a polysulfide-based sealant made of a premium-grade material that makes it be effective. It is a non-staining product that cures at an ambient condition to a tear-resistant, flexible, and firm rubber.

The paint is highly resilient and has super recovery qualities after extended periods of elongation or compression. It also has an amazing resistance to chemicals, shrinkage, aging, and weather conditions. Due to this, it is used for sealing and caulking joints to provide a flexible, firm, and weather-tight seal.

Actually, it is perfect for sealing joints on pool decks and is applicable for both exterior and interior use. Another great feature of this product is the ability to resist UV lights and abrasion.  It also comes in an easy to handle package that contains the right ratio of base to the agent, which you should maintain.

2. Dyco Pool Deck 5-Gal. 9060 Cream Low Sheen Waterborne Acrylic Stain

The Dyco Pool Deck 5-gal is a waterborne product with high-quality film characteristics. It was designed to offer a low sheen hard shield finish on all concrete surfaces as well as pool decks.

The unit features a UV inhibitor that ensures the cover will last for long when applied on your deck. Furthermore, it is resistant to most harsh chemicals that are used in the pool. One thing that you should note about this paint is that it might make your deck slippery when wet.

Compared to most brands out there, this paint is quite affordable and will go a long way to make your deck look fresh and new. It is also very easy to apply and won’t get damaged easily.

3. Kelly Technical 1-Gal. Olympic Patio Tones Deck Coatings Sand Valley

With Olympic Patio Tones Deck and coating, you can easily give your swimming pool as well as deck surface a fresh and updated look. You only need to choose the ideal tone for your patio surface, apply the paint, and enjoy as your deck gets a new life and change your outdoor area.

This water based non-slip coating provides more than just the ordinary paint job, as it deeply penetrates the surface to offer a slip-free surface. The paint can even cover damage when painted over broken concrete or pesky cracks.

Another key feature, this coat is resistant to chipping and peeling for years. Actually, it is extremely durable even under harsh climate and is a great solution for improving and updating your pool’s deck.

4. DECK-O-SEAL Deck O Seal Tan 4701033

The Tan 4701033 is a non-staining paint that cures under ambient temperature to form a flexible, firm, and tear-free rubber. Another great feature of this product is its excellent recovery qualities and is highly resilient.

Moreover, it is able to resist the majority of pool chemicals, meaning that it won’t get damaged easily. It is also resistance to shrinkage, aging, and harsh weather conditions. What this means is that when you use this paint from DECK O SEAL, you are assured of having an evergreen deck.

You can use this paint to seal joints in order to provide a weather-tight, flexible, and firm surface. Actually, it was made for sealing joints on a pool deck and can be used for both the exterior and interior use.

5. In The Swim Patio And Deck Paint White

This is a non-slip deck and patio coat that is better than most paints on the market today. That is made possible by the fact that it makes your deck surface safer for sunbathing and walking due to its non-slip nature.

Each bucket usually covers about 100 to 125 sq. ft. per gallon and for the first time use, you will require at least 2 coats to get it done the right way. Furthermore, this paint can be used to worn concrete or wood decks to revitalize them, providing them with fresh life.

Moreover, you don’t need to mix anything before you apply it; hence, no hassles or messy pre-mixing. The coat is extremely durable and is easy to clean using a garden hose. With that said, you will need an oil based primer to apply the paint on wood.

6. DeckWise Ipe Seal Hardwood Endgrain Sealant

DeckWise Ipe is a wax-based sealer that has been shown to increase the structural durability of hardwood deck. It was made to prevent and check drying splits in newly installed lumber, logs, and blanks. As well, it protects other exposed wood ending and face grain.

Actually, this product forms a bond that prolongs the life of your deck board. One can of this product often cover around 500 sq. ft. of decking, meaning that you don’t require a lot of paint to cover your deck.

Perfect for applying within 24 hours after cutting, this coating is pretty effective and will provide the maximum benefits within this time. Note that the coat might change the color of your deck, depending on dryness and species of the wood used to make your deck.

Pool Deck Paint Buying Guide

Choosing the right paint for your deck can be hard since there are dozens of paints out there. Each type has its own pros and cons but there are things you can do to ensure that you get the model that suits your need.

Properties of Best Deck Paint

The best paint should have the following 4 properties:

• Wear-resistance – This will guarantee durability.
• Prevent cracking – Precipitation and UV rays affect the deck and its structure begins to change, which can utmost result in warping.
• High-quality decorative element – This will come in handy to preserve the deck’s original look over the years.
• Protect the surface from insects and microorganisms – The truth is; pool decks are a great environment for mold and fungus development and it often attracts insects.

In short, deck paint should form the perfect appeal and protection.

Types of Deck Paint

There are different types of deck paints. These include:

Oil Deck Paint – This paint features 2 main elements: mineral and oil additives. You need to stair this paint well before you apply it. One of its main features is amazing bonding but it takes long to dry.

Alkyd Deck Paint – It is a great alternative to oil based paints.  It contains resin, glycerin, oils, and a fine fraction of granite and sand. Its main properties include affordability and resistance to harsh weather conditions.

Water-Based Deck Paint – This is the most popular type of deck paint. This is because it offers both superb durability and qualities. There are different kinds of this paint including:

• Acrylic deck paint – some of its qualities include resistance to harsh weather conditions, excellent water vapor permeability, and good covering ability.
• Rubber/Latex deck paint – some of its qualities include safe for human, excellent durability, and water vapor permeability.

Deck Paint Choice Criteria

What is the best pool deck paint? Any statement that states one product is better than the others would be inappropriate. It’s necessary to consider the following:

• Manufacturer – Go for a manufacturer that is trustworthy.
• Expiration date – This is the first thing you should check before you buy your paint.
• Price – High price doesn’t always translate to high quality, and a cheap paint might not be ideal either.
• Appearance – It will depend on your preference.
• Prepping – Every type of deck paint will require special primers and treatments.

Pool Deck Paint FAQs

Q: Which is the ideal deck paint to buy?
A: You can choose one of the products we have reviewed above to ensure that you get the right paint for your deck. Also, always buy paint from a reputable brand.

Q: What is the process of preparing my pool deck before painting?
A: The process is very easy:

• Clean your deck.
• Leave it to dry.
• Apply the paint

Q: Why should I prepare the deck before painting?
A: This is to ensure that you paint on a clean surface and avoid the paint from being contaminated and peeling of soon. It also makes it easier to paint your pool deck.

Q: Can I paint a pitted or damaged pool deck?
A: You can paint a damaged pool deck but ensure that it is stable. Simply follow the normal process of painting a pool deck and it will look new.

Q: Paints and stains: what is the difference?
A: Paint is thicker than stain, harder, to apply, and more expensive. Stain soaks into your deck, changing its normal color and proving sheen.

Q: What are the benefits of painting a pool deck?
A: The main benefit of painting a pool deck is to ensure that it gets a new life. It will look new after painting it and make it more attractive.

Conclusion

Pool decks are more than just floors for walking on; they are visual hallmarks of your swimming pool. Many people want their decks to reflect their level or look of quality, and the best way to ensure this is to paint them using the best pool deck paint.