Pool heaters are very complex and essential devices that come with your swimming pool. They are an essential component of your pool as they are responsible for the water treatment process, which pushes the water through the filtration system and traps any residue in it.
The heater also controls the flow of water to prevent algae growth and accumulation. A renowned and popular problem with most of the pool heaters is sudden turn off. The problem can be caused by insufficient voltage, pump overheating, and complications on the impeller, excessive power consumption, and poor priming. The situation where the pool heater suddenly turns off is called tripping.
Pool Heater Problems
Using a pool heater is an ideal technique of warming your pool, especially when its temperatures start dropping. But nothing stops your cool weather swimming season abruptly and faster than a malfunctioning heater. The following are the common pool heater problems associated with pool heaters:
- Heater won’t turn on: This will take you back to the first troubleshooting part. Check the light to be sure it is on. Next, ensure the pool heater is switched on, and the gas supply flap is on as well.
- Heater not reaching the desired temperature: This could mean that the thermostat is too low. However, your heater capacity might not be enough for your pool, or you may not have a suitable source of gas for your heater.
- Heater Comes On Then Goes Off: If your heater continues to come on and off, the issue could be inadequate airflow. Numerous indirect problems result in low airflow. If not changed regularly enough, the dirty air filters can become grimy and clogged, which implies the heat exchanger holds heat and ultimately makes it overheat.
- Cycling: Cycling can be caused by a lack of a water flow, which could be due to a dirty filtration system, a clogged flap, or reversed water connections. Sometimes cycling could be caused by a thermostat that needs replacement.
- Leaking: Over time, chemicals used for keeping the pool water clean can harm the heat exchanger. This can also happen as a result of low winter temperatures.
- The pilot does not light up: This is the first thing to check on a gas device. If the pilot light is not on, the gas pressure may be too low or inadequate, the air supply may not be good enough, or the heater may not be properly vented.
How to Fix a Pool Heater?
If properly fixed and adequately maintained, a pool heater can serve you for 5-10 years or beyond and maximize energy efficiency. It is advisable to get an expert or licensed electrician to fix the heater, especially the heater’s electrical connections. The device functions spectacularly with maximum air circulation when placed in a clear surrounding with no occlusions. When installing your heater, you need to take note of the following:
The location you want to install the heat pump, flat surface closer to the pool or filtration system, and make sure airflow is limited.
The location should be approximately 25-feet away from the pool, but if you are unsure of how to fix it, call professionals or follow the manufacturer’s manual guide.